Rovan XL 45cc Monster Truck Red

ROVAN XLT

4WD MONSTER TRUCK

Built for the RC Enthusiast the Rovan Monster Truck is a stunning piece of kit with a whole host of Pre-Installed Upgrades & A Monster of an Engine!

Note: This car comes with a USB Charger

It's here! Rovan's 4WD Monster Truck created from the Rovan LT(Short Course) Platform & then completely beefed up utilizing a 7075 Chassis, Plenty of anodized red alloy parts and powered by a High Torque 45cc Engine the XLT lives up to it's name, it's truly a monster!

4WD Drivetrain
Rovan 45cc 4 Bolt Engine
Rovan Side Exit Silenced Pipe
AT Monster Truck Wheels
Triple Servo Setup (Dual Steering)
Billet Extended Arms
CNC Bleeder Shocks
Extended Front & Rear Shock Mounts
CNC Servo Bracing Setup
Front & Rear Extended Turnbuckles
5mm 7075 Alloy Chassis
XLT Prepainted Body

45cc 4-Bolt 2 Stroke Engine

Straight out the box this car comes prefitted with a High Torque 45cc Engine which is a huge step up from the 29cc Engines smaller rc cars come with which is what you'd expect considering the sheer size of this beast. In combination with the 45cc Engine this is powered by a Walbro1107 Carb and Ignited by an NGK Sparkplug

Servos

Installed in the Rovan XLT are 3 Servos, 2x 75KG Full Metal Geared Servos in a dual steering setup with Billet Servo Arms and a another 75KG All Metal Geared Servo for the throttle.

Shocks

The XLT comes with 10mm Anodized Red CNC Bleeder shocks with Adjustable threads and with a wide range of shock oils available to purchase you can tune the car to suit almost any terrain you care to run on.

CNC Super Wide Extended Arm Kit

The XLT comes with stunning CNC machined billet anodized etended arms to give your car a menacing monster truck stance. This combined with the Huge AT 220x120mm Wheels gives you an incredibly high ride height with huge ground clearance.

FSGT3B 2.4 GHz Radio System

All our cars come with 2.4 GHz radio systems, this is a major improvement over the old style transmitters which were prone to interface and range issues. 3 Channels and tons of tweaking options make this one of the most popular transmitters available.

Specs

45cc single-cylinder, air-cooled 2-stroke 4-Bolt Engine (standard with Walbro 1107 carburettor & NGK spark plug)
Length: 35.8 inches (910 mm)
Width: 26.4 inches (670 mm)
Height: 15 inches (380 mm)
Front Wheel Width: 22.8 inches (580 mm)
Rear Wheel Width: 24 inches (610 mm)
Side Exit Stainless Steel Silenced Exhaust Pipe
800CC super large-volume fuel tank
Four-wheel drive shaft transmission system
Front, middle, and rear three-stage differential system
Differential dual disc brake mode
Front CVD transmission half shaft, rear axle head type transmission half shaft
Power output front short drive shaft, rear long driveshaft
Billet middle differential bracket
Billet clutch cup support cover
75KG all-metal gear throttle servo
2X 75KG Servo full metal gear double steering gear with Billet steering gear arms
6V SC4500 mAh battery
10mm Front & Rear CNC Billet Bleeder shock absorbers
Front & Rear anti-roll bars
5mm CNC 7075 aluminium chassis
XLT Polycarbonate Pre-Painted body
XLT AT Tyres (220x120mm)
8000rpm clutch
Mixing Bottle
One-piece hexagonal clutch disc
Basic Toolkit
Dual Servo Steering system
CNC Billet front and rear support beams
CNC Billet steering gear support bridge
CNC Billet steering gear press
CNC Billet middle differential cover
CNC Billet fuel tank cap
CNC Billet double-arm direction seat (double-sided rocker arm 15T/17T)
CNC Billet air filter box
CNC Billet front and rear extended A-arms
CNC Billet front and rear extension rods
CNC Billet front and rear shock towers

Fly Sky GT3B Transmitter

Model Memory
Servos NOR/REV
Steering Trim
Throttle Trim
Dual Rate
End Point
ABS Settings
EXP Settings
Trainer Port (for VRC)
CE & FCC certified

Transmitter Specification

Channels : 3 Channels
Model type : car/boat
RF range : 2.40-2.48GHz
Bandwidth : 500Hz
Band : 160
RF power : less than 20DB
2.4G system : AFHDS
Code type : GFSK
Sensitivity : 1024
Low voltage warning : yes(less than 9V)
DSC por t: yes(3.5mm:output:PPM)
ST range : 90
TH range : 45(F:30;B:15)
Power : 12V DC(1.5AA*8)
Weight : 328g
ANT length : 26mm
Size : 159 x 99 x 315mm
Certificate : CE,FCC

The XLT

Front View

Top Down View

CNC Shocks

NOTICE

Make sure to put some blue or red lock-tight on screws going into aluminium parts! Especially the upper suspension arm turnbuckle ends and throttle/brake stop collar set screws. This car is not for beginners to the hobby, If you are looking for your first 5th scale RC we recommend starting with the LT or Baja Platform with a smaller engine.

Drive Pins + Gears are Excluded from the Warranty

Once your Car is received

Please ensure you check your car over for any loose nuts and Bolts, Threadlock as required. Please also check oil levels in your shocks and Differentials and Fill if required BEFORE use. As failure of any parts due to lack of oil or loose parts will not be covered under warranty.

Please Refer to the Starter Guide on our website for any Help before running your car

More Information