Kyosho KB10W Mad Wagon VE 3s 4WD Readyset 1:10 - Blue

The Kyosho Mad Wagon VE 3S Blue (K.34701T2B) is a Readyset 1/10 4WD monster truck designed for tough bashing and stadium-style fun. Riding on the all-new KB10 shaft-driven chassis, it combines an aluminium main chassis with split front/rear blocks and double wishbone suspension for confident handling on varied terrain. A factory-installed brushless system delivers up to 75km/h on 3S LiPo power, while the pre-painted Ultra Scale 1980s-style van body completes the look.

Pre-assembled with the Syncro KT-231P+ 2.4GHz radio, the Mad Wagon VE includes newly developed electronics and all-terrain 2.8″ wheels and tyres. Tyre sizing offers suggested compatibility with standard 1/10 2.8″ options, giving you scope to tailor grip and gearing for your surface. An optional LED light unit (No.97054-4B) and a clear body shell are available to expand customisation, and a rear wheelie bar helps keep launches in check.

Features

• Readyset includes pre-assembled chassis, painted body and Syncro KT-231P+ radio system
• Powerful brushless setup capable of up to 75km/h; RC system pre-installed
• Original wagon-style body in blue; optional clear shell available
• New KB10 shaft-driven 4WD chassis with proven double wishbone suspension
• Fully equipped with 22 ball bearings for efficient drivetrain
• Lightweight resin telescopic universal shafts on all four wheels
• Includes newly designed 2.8″ tyres and wheels; suggested compatibility with standard 1/10 2.8″ tyres/wheels
• Wide gear ratio selection from included gearing, also supporting on-road use
• Rear wheelie bar helps prevent backflips under hard acceleration

Technical Data

• Length: 472mm
• Width: 350mm
• Height: 198mm
• Wheelbase: 295mm
• Tread (F/R): 278mm
• Tyres (F & R): φ128 x 70mm
• Gear Ratio: 15.22:1
• Weight: 3,610g (approx.)
• Motor: TORX10L brushless, 2850Kv

Readyset Contents

• Factory-assembled chassis with control linkages
• Pre-cut and painted body with decals applied
• 2.4GHz Syncro KT-231P+ transmitter
• 1.5mm / 2.0mm / 2.5mm L-shaped hex wrenches
• Cross wrench
• Integrated spanner: 4 / 5 / 5.5 / 7 / 10mm

Required To Complete

• 4 x AA batteries for transmitter
• 2–3S LiPo drive battery (installable size approx. 143 x 47 x 30mm)
• Suitable LiPo charger