Kill Switch Kit for Baja X2 and 5ive

Kill Switch Kit for Baja X2 and 5ive

---

ZENOAH/CY 'FAILSAFE' ENGINE KILL SWITCH

For Use with Standard PWM/PPM Radio Control Protocol.

Specifically designed for Zenoah/CY Petrol Engines with either PCI Electronic Ignition Systems (uses 4.8v Battery Pack) or C.D.I. Type Magneto Ignition which require the 'CB' (Contact Breaker) Circuit taken to Earth to 'Kill' (Switch-Off) the engine.

Introducing yet another quality product from the same stable as our very successful RC Switch and Control Products, we introduce our latest design in fail-safe control technology. A 'micro' sized hand crafted Surface Mount Technology (SMT) all British made module.

The Zenoah Fail-safe Kill Switch specifically for the discerning 'Petrol-Heads' amongst us boasts a triple action features to ensure that the engine on your precious craft is shut down whenever there is a problem with your RC signal, electrics or simply when you just want to call time.

The Kill Switch is installed on a switched R/C receiver channel which either causes a 'Short Circuit' across the Kill Line (Refer to Drawing 3 in the Product Information Sheets), effectively killing the engine when the Transmitter switch is thrown, or breaks the circuit to the Electronic Ignition System causing the engine to stop likewise.

Secondly, it constantly analyses the incoming RC signal pulses using a micro-controller looking for any problems with signal strength quality or integrity. If the Signal strength or quality is poor or missing, the circuit places the same condition onto the Engine Ignition System once again, safely killing the engine.

Finally, the same outcome occurs when DC power is lost from RC the control system, thus making this one of the most versatile Failsafe device available.

The kill-switch can also be used with the same safety features without a Switched Channel. You can call time by simply turning off your RC Transmitter. This will effectively throw the module into an error mode and shut down the vehicle. Very useful on Two Channel RC equipment.

• PLUG AND GO SOLDERLESS CONNECTIONS
• SMT DESIGN (NO SOCKETED COMPONENTS)
• SHAKE-PROOF VIBRATION-PROOF CRASH-PROOF CONSTRUCTION
• STANDARD 3 WIRE FUTABA CONNECTION (PWM/PPM)
• BUILT-IN ACTIVITY INDICATOR
• RECEIVER CURRENT DRAW 20MA
• SMALL 27MM X 15MM FOOTPRINT
• CONTACT MATERIAL - PALLADIUM-RUTHENIUM; GOLD PLATED
• ULTRA LIGHTWEIGHT - ONLY 5.9G
• BUILT IN ANTI-GLITCH FIRMWARE
• PLUG AND GO SOLDERLESS CONNECTIONS
• 4A CONTACT RATING

Note: This Killswitch is incompatible with H-CMR6 Sparkplugs if you are using H-CMR6 Sparkplug please switch to the CMR7H Sparkplug

This kit is 650mm long and will fit on the Baja, KM X2 and Losi 5ive amongst other.

Just cut length to suit.

Colour: Black

Position: Engine