R/C Car Electronics Kit - 2.4GHz Transmitter, Waterproof Receiver, Servo & NiMH Stick Pack

R/C Car Electronics Kit - 2.4GHz Transmitter, Waterproof Receiver, Servo & NiMH Stick Pack

MStyle R/C Builder’s Essentials Kit

Almost Everything You Need To Build Your R/C Car

The MStyle R/C Builder’s Essentials Kit is the perfect all-in-one electronics package for anyone assembling a new R/C car or upgrading an existing one. Whether you're a first-time hobbyist or an experienced enthusiast, this kit provides high-quality, reliable components designed to get your vehicle running smoothly with minimal fuss.

Packed with a premium radio system, waterproof receiver, powerful servo, charger, and battery, this set covers nearly every electronic requirement for most 1/10 and 1/12 scale R/C builds.

What’s Included

MStyle T-401 2.4GHz 4-Channel Transmitter

A lightweight, ergonomic, and fully adjustable radio system using modern 2.4GHz FHSS technology for interference-free driving.

• Digital 2.4GHz FHSS technology
• 4 channels
• Digital on/off switch
• Foam-covered steering wheel for extra comfort and grip
• Servo end point adjustments for steering and throttle
• Servo reversing
• Steering dual rate
• Centre trim for steering and throttle
• Built-in failsafe for signal loss protection
• Audible warnings for power-on and low battery
• Lightweight – only 4x AA batteries required

MStyle R-401 Waterproof 4-Channel Receiver

The R-401 is a compact, lightweight receiver designed to work seamlessly with the T-401 transmitter. Its silicone-jacketed PCB inside a hardcase provides waterproof protection for true all-weather running.

• Fully waterproof design
• Compatible with MStyle T-401 transmitters
• Digital FHSS 2.4GHz technology
• Simple binding procedure
• Adjustable built-in signal loss failsafe
• 4-channel output
• Built-in light controller on a separate channel – compatible with Maverick LED Light Set (#150465) and HPI Warm White LED Kit (#160560)
• Ultra-compact: 35 x 26 x 17mm
• Extremely light: only 13g
• Ideal for electric R/C vehicles with 6V 35mA minimum BEC input

S-602W 6KG Water-Resistant Servo

A tough, water-resistant steering servo ideal for bashers and racers who run in wet conditions such as rain, snow, and puddles.

• Operating voltage: 4.8–6.0V
• At 4.8V: 0.18 sec/60°, 6kg-cm torque
• At 6.0V: 0.16 sec/60°, 7kg-cm torque
• 25T servo spline
• Main case dimensions: 40 x 37.5 x 20.0mm (excluding tabs, spline, and cable outlet)
• Mounting tab hole centres: 49.5 x 10mm
• Weight: 46g (excluding servo horn)

C-U02 USB NiMH Charger

The C-U02 is a simple and safe USB Delta-Peak charger for standard NiMH battery packs.

• Charging range: 2–8 cell NiMH (600–2500mAh)
• USB input: 5V 1A (2A recommended)
• Delta-Peak charging
• Tamiya battery connector

7.2V 2000mAh NiMH Stick Pack (Tamiya Plug)

A dependable 7.2V 2000mAh NiMH stick pack with Tamiya plug, providing solid runtime and compatibility with most entry-level and mid-range R/C vehicles.

Why This Kit Is Ideal for Builders

• Covers radio, receiver, servo, charger, and battery in one package
• Perfect for new R/C builds or upgrading older electronics
• All-weather capable with waterproof receiver and water-resistant servo
• Beginner-friendly setup with simple binding and intuitive controls
• Compatible with most electric 1/10 and 1/12 R/C cars, buggies, trucks, and crawlers

Colour: Black