FlySky TMr 2.4GHz AFHDS 3 Micro Mini RC Receiver

FlySky TMr 2.4GHz AFHDS 3 Micro Mini RC Receiver

TMr is a receiver suitable for FPV, using AFHDS 3 (third-generation automatic frequency-hopping digital system), external dual antenna bidirectional transmission, micro in size and can output PWM/PPM/I-BUS/S.BUS//I-BUS 2 signal.

Specification:

• Brand Name: FlySky
• Item Name: TMr Receiver
• Model: TMr
• RF: 2.4GHz ISM
• 2.4G Protocol: AFHDS 3
• Antenna: Dual Antenna
• Input Power: 3.5-9V
• RSSI: Yes
• Data Output: PWM/PPM/I-BUS/S.BUS/I-BUS 2
• Temperature Range: -10℃～ +60℃
• Humidity Limit: 20% ～ 95%
• Online Update: Yes
• Dimensions: 16*12*2mm
• Weight: 0.9g
• Certification: CE，FCC ID: N4ZTMR000

Note:

• These ports connect the receiver to various models, components and flight controllers. 
• GND: Connect to the ground wire.
• VCC: Power supply voltage from 3.5 – 9V.
• N.Port: In the [RX Settings] menu, select the RX port protocol, and the signal output can be set to PWM/PPM/I-BUS/S.BUS/I-BUS 2.
• - The RSSI signal strength output is turned off by default, and the relevant settings can be made in the [Signal Output ] menu under the transmitter [RX Setting].

Binding:

• Press and hold the receiver BIND button while powering on the receiver, release the BIND button after the receiver is powered on or powering on the receiver first, press and hold the BIND button 3 seconds, the LED on the receiver will flash rapidly;
• Put the transmitter into bind mode. (See the transmitter's instruction manual for more information)
• Binding is successful when the receiver's LED stop flashing. 
• If the transmitter is a one-way transmission, manually exit the transmitter when the receiver status indicator flashes slowly, Binding is successful when the receiver's LED stops flashing.
• Check to make sure that the transmitter and receiver are working as expected, if there are any issues or unexpected operations follow the steps above to bind again.

Compatibility:

The TMr receiver is compatible with all AFHDS 3 transmitters (Note: It is currently applicable to PL18 1.0.55, NB4 2.0.93 and NB4 lite 1.0.10 and later versions. The high-frequency library used by the firmware is version 3.0.)

Package Included:

• 1 x TMr Receiver

Colour: Black

Position: Front