Rovan 36cc 4 Bolt Engine

Rovan 36cc 4 Bolt Engine

---

This is the the New 36cc Engine from Rovan

Featuring an all New Design - Redesigned cylinder, crankcase, crankshaft, piston, etc for an Absolute Explosion of Power

This Rovan 36cc engine has a 39mm bore, and 30mm stroke, Milled Head to allow the Longer stroke for a true 36cc.

These include a new cylinder design with closed deck transfer ported head. And the Walbro 1191 Carb already fitted

They also come with a upgraded Rovan clutch And a Rovan Easy Start pull starter fitted

So it's ready to drop into your application of choice to give you a Huge step up in engine size, while keeping your usual engine placement and spacing.

Engine Specification

---

• Cylinder displacement: 35.838 cm³ / 2.187 cu.inch
• Cylinder bore: 39 mm / 1.5 inch
• Cylinder stroke: 30 mm / 1.8 inch
• Carburettor: Walbro
• Carburettor model name: WT-1191
• Ignition system: TCI
• Spark plug: NGK CMR7H
• Start system: Easy starter

 

Size

---

• LxWxH 16.7x17.8x19.6 cm / 6.57x7x7.72 inch

 

Fitment Guide:

HPI Baja 5B/5T/5SC

No changes required, straight fit.

Losi 5IVE-T, KM X2, 30 DNT/DNB, Losi DBXL and Redcat Models

The Shorter Clutch Housing must be fitted as it needs to be smaller than the supplied housing.

You must also fit a KM/CY Crankcase cover as hole spacings are slightly different.

• Zenoah, RV-32-36cc Crankcase Covers - 68mm Hole to Hole centre.
• KM/CY/QL Crankcase Covers - 65mm Hole to Hole Centre.

FID Dragon Hammer

No changes required, straight fit.

(You May have to use the spacers included with the Dragon, but Not always

MCD Racing Cars

Straight fit into the RR5 models.

Due to the larger crankcase, we do not recommend using the Rovan 36cc Engine in the older V4,EVO3,EVO2 and Pro-Line Models.

FG Modelsport / Smartec Cars

The larger crankcase interferes with the input shaft into the transmission,

We do not recommed the Rovan 36cc Engine for these models.

GoPed Scooters

Straight fit to 54mm clutch models.

Note: New Engines require running in and setting up they are not ready to drop in, the Starter Guide needs to be followed & carb needles need to be set to prevent damage to the Engine, If you are unsure contact us before running the engine and we can help further

Colour: N/A

Position: Engine

Compatible with: HPI Baja 5B, KM Buggy, Rovan Buggy, KM Blade, Q-Baja, KM T1000, HPI Baja 5T, HPI Baja 5SC, Losi 5ive-T, TLR 5ive-B,Losi Mini WRC,King Motor X2,30 Degree North Truck,30 Degree North Buggy,FID Dragon Hammer,FID Dragon Hammer V2,VEKTA.5,VEKTA.5TT,