Baja Buggy Rear Plastic Hub Bearing Carrier Set Green
These are the replacement hubs for the rear end of the baja platforms,
These are designed to go on the end of the rear lower Arms,
They carry the bearings for the drive axles to pass through, to send power to the rear wheels.
Note: Colour shades may vary
Compatible with: KM Buggy, HPI Baja 5B, KM T1000, Rovan Buggy, HPI Baja 5T, HPI Baja 5SC, Q-Baja, KM Blade,
|Car||HPI Baja 5B, HPI Baja 5SC, HPI Baja 5T, KM Blade, KM Buggy, KM T1000, Q-Baja, Rovan Buggy|
NOTE: Instructions for installation are not included unless stated in the products description.
All products require some prep out of the package - some components are assembled for packaging purposes only, so we strongly recommend that you check all metal-to-metal fasteners for tightness, check fitment and adjust if needed, and use liquid threadlock where applicable. Failure to do so is not a warranty-related incident.
Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners this means Extra hardware, shims, or spacers may be required for some installations.
Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features.
Items that are different from the OEM part may require modification to the vehicle for proper clearance.
Some branded items may be only compatible with the vehicle's OEM parts but not with another branded item due to design limitations. For multiple-fitment items, some parts may not be used based on application.
DBXL / DBXL-E
The DBXL / DBXL-E is not cross compatible there are parts that will fit between the two models but some parts have design changes on the DBXL-E, this also applies from the DBXL-E to the DBXL-E 2.0 please look at the car compatibility guide.
DBXL =/= DBXL-E
DBXL-E =/= DBXL-E 2.0