Atop RC DBXL-E 2.0 Alloy Diff Casings - Red
This is the Upgraded CNC Alloy Diff Casings for the DBXL-E 2.0 from Atop RC.
They are made using high-quality 6061-T6 Alloy, which has been CNC Machined into these stunning shaped casings, Fitting them not only greatly improves the looks of your truck, but it also helps with keeping the bearings well-sealed whilst keeping the Diff & Pinion gears in good contact with each other.
Position: Front& Rear
Compatible with: Losi DBXL-E 2.0, Losi DBXL-E, Losi DBXL, Losi MTXL,
|Car||Losi DBXL, Losi DBXL-E, Losi DBXL-E 2.0, Losi MTXL|
NOTE: Instructions for installation are not included unless stated in the products description.
All products require some prep out of the package - some components are assembled for packaging purposes only, so we strongly recommend that you check all metal-to-metal fasteners for tightness, check fitment and adjust if needed, and use liquid threadlock where applicable. Failure to do so is not a warranty-related incident.
Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners this means Extra hardware, shims, or spacers may be required for some installations.
Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features.
Items that are different from the OEM part may require modification to the vehicle for proper clearance.
Some branded items may be only compatible with the vehicle's OEM parts but not with another branded item due to design limitations. For multiple-fitment items, some parts may not be used based on application.
DBXL / DBXL-E
The DBXL / DBXL-E is not cross compatible there are parts that will fit between the two models but some parts have design changes on the DBXL-E, this also applies from the DBXL-E to the DBXL-E 2.0 please look at the car compatibility guide.
DBXL =/= DBXL-E
DBXL-E =/= DBXL-E 2.0