HDT Alloy Rear Shock Absorber 110x18mm
These are a PAIR of the Rear Shocks for Small Scale RC Cars
You get a Pair of anodized Alloy Rear Shock Absorbers
Which can be adjusted and changed to change the performance of your car and to allow your car to be driven on even more terrains and surfaces.
Delivered without oil, you will need a bottle of oil according to your model below.
Some examples on 1/10 cars:
Track Car Front and rear:
Buggy, Short Course 2 wheel drive
Buggy, Monstertruck 4 wheel drive
Note: These are only examples, you will need to adjust the shock oil depending on your driving style.
Position: Rear& Front
Compatible with: Traction Hobby Cragsman, Traction Hobby Cragsman C,
|Car||Traction Hobby Cragsman, Traction Hobby Cragsman C|
NOTE: Instructions for installation are not included unless stated in the products description.
All products require some prep out of the package - some components are assembled for packaging purposes only, so we strongly recommend that you check all metal-to-metal fasteners for tightness, check fitment and adjust if needed, and use liquid threadlock where applicable. Failure to do so is not a warranty-related incident.
Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners this means Extra hardware, shims, or spacers may be required for some installations.
Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features.
Items that are different from the OEM part may require modification to the vehicle for proper clearance.
Some branded items may be only compatible with the vehicle's OEM parts but not with another branded item due to design limitations. For multiple-fitment items, some parts may not be used based on application.
DBXL / DBXL-E
The DBXL / DBXL-E is not cross compatible there are parts that will fit between the two models but some parts have design changes on the DBXL-E, this also applies from the DBXL-E to the DBXL-E 2.0 please look at the car compatibility guide.
DBXL =/= DBXL-E
DBXL-E =/= DBXL-E 2.0