MadMax X-Maxx Spur gear, 50-tooth, steel (1.0 metric pitch)

MadMax X-Maxx Spur gear, 50-tooth, steel (1.0 metric pitch)

HOT RACING 50T steel spur gear

Hot Racing 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.

REQUIREMENTS:

- Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh)

- With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.

COMMENTS:

- Upgrade for factory plastic 6448 or 6448X 54T spur gear

Features:

• CNC machined hardened steel construction
• Black oxide finished
• Laser etched tooth count marking

Specifications:

• Overall diameter: 52.8mm
• Gear face width: 8mm

Colour: Black

Position: Centre

Compatible with: Traxxas X-Maxx, Traxxas Maxx, Traxxas E-Revo 2.0, Traxxas XO-1,