MadMax 5ive-T CNC Push-Pull Steering Kit - Blue

MadMax 5ive-T CNC Push-Pull Steering Kit - Blue

The New Push-Pull Steering kits from MadMax Allows for the use of Twin Steering links from your steering servo, This means you will benefit from better steering with more holding power, And far less wear on your servo.

Just remove your older single arm set up, and then replace with the MadMax Kit.

They also look great to, Adding some Extra style to your truck.

NOTE: This kit is compatible with a 30 Degree North Truck, King Motor X2 & Losi 5ive-T providing you replace the inner steering coloumn hex (X55006) for LOSB2553. If you don't want to purchase another hex you can modify the steering hex by slightly filing the edges of the hex bringing the hex down from a 20mm hex to a 19mm hex.

The Steering arm that comes with this kit fits the Savox 0235/0236 largescale servos perfectly however if you have the K-POWER DM4000 Servo in your car you will need to purchase part number 61035-1 as the spline will fit both the Savox and the K-Power Servos.

Colour: Blue

Position: Front

Compatible with: King Motor X2, TLR 5ive-B, Losi 5ive-T, Rovan LT, 30 Degree North Buggy, 30 Degree North Truck,