FID Electric Starter Motor Compatible With Baja And X2 / Losi 5T
Fed up with pull starts?
Looking for something more efficient?
Then the FID Electric Starter Motor could be just what you're looking for.
It's Compatible with All Baja's, X2's, 30°N DNT, Rovan LT, Losi 5ive-T, DBXL, MCD etc.
This kit contains all you need to get it into your car and ready to connect to your controller.*
It's also Great if you are looking for you next upgrade, or just want to make your friends jealous.
Check out this video to see how to Build it up, Install, and see it in action
* 3 Channel Radio System Needed.
FID Brushless Electric Remote-Control Starter System,
For use on 2 stroke petrol Engines from 23cc-38cc.
1: Motor 2000KV outer rotor high speed motor, maximum speed 25000 rev / min.
2: ESC 80A brushless and non-inductive custom version start and stop ESC, the maximum support 2-3S battery.
FID brushless electric start system start-up principle:
1: You will need to purchase a suitable 3S, 5000 mAh Lithium Battery to power the starter, the connection from the battery will need a T plug (Deans) to link into ESC,
The ESC then has three bullet connectors to link to the motor.
And the ESC BEC line connection goes into the receiver, Here you can choose between the third channel, fourth channel, or fifth channel, whichever channel is free and you want to assign to the starter (Please Note: No external power supply is to be connected to the receiver to avoid damaging the ESC)
2: The Flameout module.
The Flameout module has two connections, the connection with the 3 wires plugs into the receiver, either channel 3 or 4,
And the other connection with the 2 wires (Red & Black) connects to the engine Stop switch.
3: Start mode:
When you press the button on the assigned channel to start, the brushless power motor will start and spin for approx 2.5S, and then automatically turned off, if your engine didn’t start, and you need to try again, then please toggle the switch again.
4: Included in the kit:
Starter Kit with Brushless motor, ESC, New flywheel, CNC Alloy Pull Starter Pawl Plate, a flywheel removal tool, and piston stopper.
(NOTE: You will need to replace the original flywheel with the included flywheel, to be able to bolt on the CNC Alloy Pull Starter Pawl Plate.
Compatible with: Losi 5ive-T, King Motor X2, 30 Degree North Truck, Rovan LT, HPI Baja 5B, KM Buggy, Rovan Buggy, KM Blade, KM T1000,HPI Baja 5SC,
|Car||30 Degree North Truck, HPI Baja 5B, HPI Baja 5SC, HPI Baja 5T, King Motor X2, KM Blade, KM Buggy, KM T1000, Rovan Buggy, Rovan LT, Losi 5ive-T|