Rit Dye Liquid Dye Purple

Rit Dye Liquid Dye Purple

In stock

Rit Dye Liquid Dye Purple

Availability: In stock

Rit Dye Liquid Dye Purple

Rit Dye

Use these liquid dyes to dye your own fabric

Here's What Rit Will & Will Not Dye

Choose Your Fabric & Materials

Rit works best on many natural, washable fabrics and materials, such as ...

100% cotton, linen, silk, wool, ramie

Synthetics such as rayon and nylon

Fiber blends with at least 60% cotton or other dyeable fiber

(Blends will tint evenly but will not achieve full color)

Nylon-based plastic such as those found in buttons, fasteners, golf balls & lacrosse sticks

Natural materials such as wood, wicker, paper, feathers and cork

... but there are fabrics and materials that will NOT accept dye such as ...

100% polyester, acrylic, acetate, fiberglass, spandex and metallic fibers

Fabrics with rubber backing (bath mats or throw rugs)

Fabrics with special finishes such as water repellents

Fabrics with bleach damage or extensive staining

Fabrics washable only in cold water or labeled "dry clean only"

Polyethylene plastics such as golf discs

Polycarbonate plastics such as eyeglass frames

If you are in doubt as to whether your fabric will accept dye, test a swatch.

Achieving True Color

Always follow manufacturer's care instructions for your fabric as well as Rit Dye package or bottle instructions.

Remove stains on fabric with Rit Super Stain Remover or Rit Color Remover before dyeing to achieve uniform color results.

Choose your colors. You can use one, two, three or as many colors as you like on one garment. However, if you use more than one color, it's usually best to start with the lightest color.

Be sure to use enough dye for the weight or size of the project. For example, for a pound of dry fabric (about 3 yards), use one package of Rit powder or 1/2 bottle of Rit liquid in 3 gallons of water.

Dissolve powder dye thoroughly in 2 cups of very hot water first to avoid dye spotting. Stir dissolved powder dye or well-shaken liquid dye into dye bath until evenly dispersed. Never pour liquid or powder dye directly on fabric.

For the deepest color, use a water temperature of 140�F/60�C. Note: If tap water is not hot enough, heat water in a tea kettle or in the microwave.

When dyeing 1 pound of dry fabric in dark or bright colors such as Black, Dark Brown, Cocoa Brown, Navy, Purple, Wine, and Dark Green, use double the amount of dye (2 packages of Rit powder or 1 bottle of Rit liquid) in 3 gallons of water.

For more intense color when dyeing fabrics containing cotton, rayon, ramie, or linen, add 1 cup salt to the dyebath. When dyeing nylon, silk and wool, add 1 cup white vinegar to the dyebath. If possible delay adding the salt or vinegar until 5 minutes after the fabric has been in the dye bath. The delay will help to promote level dyeing.

Add 1 Tablespoon laundry detergent to all dye baths to help promote level dyeing.

The longer the garment is immersed in the dye bath, the deeper the resulting color. Items can remain in the dye bath up to 1 hour as long as the water remains hot. You'll also have to make sure the item receives constant agitation or stirring.

Garments will also look darker when wet and prior to washing.

When you remove clothes from dye bath, rinse in warm, then cool water until water runs clear. (Warm water helps to rinse off surface dye more effectively.)

Wash your fabric/clothes in warm water with mild detergent and then rinse thoroughly in cool water. Machine dry or hang dry.

Fiber Content Affects Dye Color

Garments and fabrics will take dye differently due to their fiber content and weight. With the new Rit dye formula, these swatches dyed in Scarlet are brighter, more vibrant and show improved color continuity.

Tips for Dyeing Special Fabrics


Colour: Purple

More Information
Write Your Own Review
You're reviewing:Rit Dye Liquid Dye Purple
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?