Rovan XLT 45cc Monster Truck Blue

Rovan XLT 45cc Monster Truck Blue

In stock

Rovan XLT 45cc Monster Truck Blue

£1,004.99
Availability: In stock
Only 3 left
SKU:
RV-XLT450-blu

ROVAN XLT

4WD MONSTER TRUCK

Built for the RC Enthusiast the Rovan Monster Truck is a stunning piece of kit with a whole host of Pre-Installed Upgrades & A Monster of an Engine!


Note: This car comes with a USB Charger

It's here! Rovan's 4WD Monster Truck created from the Rovan LT(Short Course) Platform & then completely beefed up utilizing a 7075 Chassis, Plenty of anodized blue alloy parts and powered by a High Torque 45cc Engine the XLT lives up to it's name, it's truly a monster!

  • 4WD Drivetrain
  • Rovan 45cc 4 Bolt Engine
  • Rovan Side Exit Silenced Pipe
  • AT Monster Truck Wheels
  • Triple Servo Setup (Dual Steering)
  • Billet Extended Arms
  • CNC Bleeder Shocks
  • Extended Front & Rear Shock Mounts
  • CNC Servo Bracing Setup
  • Front & Rear Extended Turnbuckles
  • 5mm 7075 Alloy Chassis
  • XLT Prepainted Body

45cc 4-Bolt 2 Stroke Engine

Straight out the box this car comes prefitted with a High Torque 45cc Engine which is a huge step up from the 29cc Engines smaller rc cars come with which is what you'd expect considering the sheer size of this beast. In combination with the 45cc Engine this is powered by a Walbro1107 Carb and Ignited by an NGK Sparkplug

Servos

Installed in the Rovan XLT are 3 Servos, 2x 75KG Full Metal Geared Servos in a dual steering setup with Billet Servo Arms and another 75KG All Metal Geared Servo on the Throttle.

Shocks

The XLT comes with 10mm Anodized Blue CNC Bleeder shocks with Adjustable threads and with a wide range of shock oils available to purchase you can tune the car to suit almost any terrain you care to run on.

CNC Super Wide Extended Arm Kit

The XLT comes with stunning CNC machined billet anodized etended arms to give your car a menacing monster truck stance. This combined with the Huge AT 220x120mm Wheels gives you an incredibly high ride height with huge ground clearance.

FSGT3B 2.4 GHz Radio System

All our cars come with 2.4 GHz radio systems, this is a major improvement over the old style transmitters which were prone to interface and range issues. 3 Channels and tons of tweaking options make this one of the most popular transmitters available.


Specs

    • 45cc single-cylinder, air-cooled 2-stroke 4-Bolt Engine (standard with Walbro 1107 carburettor & NGK spark plug)
    • Length: 35.8 inches (910 mm)
    • Width: 26.4 inches (670 mm)
    • Height: 15 inches (380 mm)
    • Front Wheel Width: 22.8 inches (580 mm)
    • Rear Wheel Width: 24 inches (610 mm)
    • Side Exit Stainless Steel Silenced Exhaust Pipe
    • 800CC super large-volume fuel tank
    • Four-wheel drive shaft transmission system
    • Front, middle, and rear three-stage differential system
    • Differential dual disc brake mode
    • Front CVD transmission half shaft, rear axle head type transmission half shaft
    • Power output front short drive shaft, rear long driveshaft
    • Billet middle differential bracket
    • Billet clutch cup support cover
    • 75KG all-metal gear throttle servo
    • 2X 75KG Servo full metal gear double steering gear with Billet steering gear arms
    • 6V SC4500 mAh battery
    • 10mm Front & Rear CNC Billet Bleeder shock absorbers
    • Front & Rear anti-roll bars
    • 5mm CNC 7075 aluminium chassis
    • XLT Polycarbonate Pre-Painted body
    • XLT AT Tyres (220x120mm)
    • 8000rpm clutch
    • Mixing Bottle
    • One-piece hexagonal clutch disc
    • Basic Toolkit
    • Dual Servo Steering system
    • CNC Billet front and rear support beams
    • CNC Billet steering gear support bridge
    • CNC Billet steering gear press
    • CNC Billet middle differential cover
    • CNC Billet fuel tank cap
    • CNC Billet double-arm direction seat (double-sided rocker arm 15T/17T)
    • CNC Billet air filter box
    • CNC Billet front and rear extended A-arms
    • CNC Billet front and rear extension rods
    • CNC Billet front and rear shock towers


Fly Sky GT3B Transmitter

  • Model Memory
  • Servos NOR/REV
  • Steering Trim
  • Throttle Trim
  • Dual Rate
  • End Point
  • ABS Settings
  • EXP Settings
  • Trainer Port (for VRC)
  • CE & FCC certified

Transmitter Specification

  • Channels : 3 Channels
  • Model type : car/boat
  • RF range : 2.40-2.48GHz
  • Bandwidth : 500Hz
  • Band : 160
  • RF power : less than 20DB
  • 2.4G system : AFHDS
  • Code type : GFSK
  • Sensitivity : 1024
  • Low voltage warning : yes(less than 9V)
  • DSC por t: yes(3.5mm:output:PPM)
  • ST range : 90
  • TH range : 45(F:30;B:15)
  • Power : 12V DC(1.5AA*8)
  • Weight : 328g
  • ANT length : 26mm
  • Size : 159 x 99 x 315mm
  • Certificate : CE,FCC

The XLT

10mm Bleeder Shocks

75KG Jumbo Servo Steering Setup

Servo Bracing


NOTICE

Make sure to put some blue or red lock-tight on screws going into aluminium parts!  Especially the upper suspension arm turnbuckle ends and throttle/brake stop collar set screws. This car is not for beginners to the hobby, If you are looking for your first 5th scale RC we recommend starting with the LT or Baja Platform with a smaller engine.

Drive Pins + Gears are Excluded from the Warranty

Once your Car is received

Please ensure you check your car over for any loose nuts and Bolts, Threadlock as required. Please also check oil levels in your shocks and Differentials and Fill if required BEFORE use. As failure of any parts due to lack of oil or loose parts will not be covered under warranty.

Please Refer to the Starter Guide on our website for any Help before running your car

More Information
Brand Rovan
Colour Blue
Fuel Type Petrol
Scale 1:5
Drive Type 4WD
Car Type Monster Truck
Write Your Own Review
You're reviewing:Rovan XLT 45cc Monster Truck Blue
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?