FID Dragon Hammer VoltZ - ARTR - 1/5th Scale 4WD
(These are a Very Advanced Model, & Not for Novices)
Introducing, The New DRAGON HAMMER VoltZ The most Advanced Electric 1/5th scale trucks available!
Note: Spare Wheel Not Included
FID's Dragon Hammer VoltZ are the first of their kind with an unparalleled spec level & design
NEW "BILLET ALLOY" SOLID REAR AXLE DESIGN
This New BILLET ALLOY Rear axle has been fully CNC Machined from a Solid Block of Alloy to produce a stunning axle that's both beautiful & strong their rear end designs are inspired by real scale four linked suspension off-road trucks.
The 230mm long lower trailing arms are CNC machined from solid blocks of alloy these are solid 14mm + thick upper bars, with Rose jointed ends, Swaybar connectors made from 11mm Thick Alloy with the Swaybar connecting arms milled from 14mm solid alloy.
A Huge 190mm long Centre Driveshaft, that has a Splined Articulation connection takes the power from the Massive electric motor to the rear axle along with Huge 235mm long Shocks allowing Huge Articulation & Travel over almost any surface you care to use it on.
NEW GULL WING DESIGNED FRONT ARMS
The Front Suspension has superb travel with 185mm Long Shocks and the New Gull Wing designed front arms give you even more ground clearence over the rough stuff, Big Oversized 7075 alloy turnbuckles take care of the steering and the front upper links make running on the Really Rough stuff extremely easy.
The Spec level that these trucks comes with is simply Unparalelled, This is an EXTREMELY Highly Spec’d truck right out of the box.
There's none of this, "Selling you NEEDED Hop-Up's after you've purchased your Truck" because it comes with all these Parts Already installed, meaning you actually get the truck you "SHOULD" get when you spend your hard earned money.
The Spec goes much further than just the Upgraded parts that you can see on the outside, included are upgraded internal bits that you can't see these are:
This gives you a Smoother & Stronger gear mesh.
INNOVATIVE WHEEL HEX DESIGN
ALL the Dragon's come with the all New innovative 'Wide' extended Wheel hex design & fittment, these have Solid Billet Alloy wheel Hexes, with extended Front & Rear hubs these have 5 Bolts that go right through your wheels to hold them in place, which are then sandwiched between 2 solid alloy plates, meaning they are Always Securely held in place, (Rather than the more usual single center nut design)
The Wheels themselves are FID's "Tomahawks" which are virtually Indestructible.
The Tyres fitted are FID's new "All Terrain" tyre 230mm x 80mm Tyres, which during testing, have proven to be great on Almost All surfaces, Gravel, Grass, Muck & Dirt, Even Snow!
IMPROVEMENTS INCLUDED FROM THE V2 DRAGON HAMMER
New Curved Design Front arms allow for even more ground clearence at the front (Over 10mm Extra), and they are now even thicker & stronger, Utilizing Thicker King pins & bolts.
The New V2 Caster Blocks are now much Larger, as are the new steering arms which are also using even larger bearings The V2 7075 Alloy Turnbuckles are again Much Thicker, Stronger & Longer than before.
Also now fitted are a Full set of New Billet Alloy 'Wide' Axle Extenders,
These new larger designed Extenders are ONLY available on RcModelz Dragon's
VOLTZ BODY DESIGN
The New Body Design for the VoltZ is made using a 2mm Clear lexan, With an Great bodyshell Design, Including a Roof Spoiler, and a Sparewheel Mount.
All Trucks come with a Full sheets of VoltZ Livery Stickers for the bodyshell,
The Battery trays that are Fitted to the Chassis incorperate a Pair of Dirt Guards to protect the inside of the truck and Cage from the egres of Dirt & Muck when your out having fun.
DUPONT NYLON PARTS
All the plastic parts used on the truck are made using a DuPont Nylon, Which is Much MUCH Stronger than a Regular Plastic, So they'll be able to stand upto much more abuse than the older types of plastics which are often used on 5th Scale models
All in All the Spec on this truck makes for one of the best out of the box spec'd 5th Scale RC's on the Market to date.
Everything and MORE is Included in the Package for you, Just as you'd expect from a company like FID.
BILLET ALLOY REAR SHOCK TOWERS
New Designed Rear shock towers come on the Dragon Hammer VoltZ, These give you even more shock adjustment holes to find the exact set up you require for your Truck, Including the Bearing mounts for the Rear Swaybar.
BILLET CNC MACHINED REAR PLATE
The VoltZ come fitted with a 9mm Thick Solid Billet Alloy top plate, This is where the Rear Motor Mount, Fans and Rear Shock Towers are mounted to.
ALLOY CENTRE GEARBOX HOUSING
The New Designed Centre Gearbox come on the Dragon Hammer VoltZ, This is where all your gears are housed from the Pinion to the Spur Gear that sends the motor drive down to the Front & Rear of the Trucks.
VOLTZ ESC & MOTOR SET UP
All this means you will have more than Enough Power to be able to throw the truck around, be that on the Track or Bashing.
TWIN STEERING SERVO SET-UP
The VoltZ has a Newly Designed steering servo set-up, They use the normal steering from previous Dragon's but now use a TWIN Largescale servo set-up.
Comprising of a Pair of complimentary JX HV2060MG Servos laid down end to end, and connected together with an alloy linkage bar & FID's Adjustable servo horns.
Included in the Build:
Item's Also Included With the VoltZ:
Radio Gear and battery's are not included
Battery Tray Dimensions:
Before Using the Truck,
Please ensure you check it over before you install your batteries, To check that you are fully happy with the trucks function and adjustable parts & linkages before use, That Everything runs Smoothly and Free whilst checking that Everything is Tight & Threadlocked where needed.
Please ensure you NEVER run more than 8s lipo Batteries in this truck, The ESC is rated to no more than 8s, and using Higher powered Lipos will VOID any manufacturers support, This ESC has been tested on 12s lipos, with unsucsessful results every time.