FID Dragon Hammer V2 (ARTR)
(These are an Advanced Model, & Not for Novices)
All the Dragon Hammer's come as a "SEMI" build kits
This means that you have a small amount of assembly upon arrival they come in 3 large sections
You simply bolt them all together using the included labeled bolt packs, add on your wheels and your ready to install your chosen engine & radio gear
Note: The Wheel beadlocks on this car are Red
This is the PACKAGE DEAL
It Includes the parts you'll need to get you started with your Dragon
Your Selected Engine
FID's Dragon Hammer is the First of it's Kind With an All NEW Design This is the First Solid rear axle Truck to be released into the 1/5th Scale Market
NEW SOLID REAR AXLE DESIGN
This New Rear End Design with a real scale inspired four linked suspension, And Huge 235mm long Shocks, allows for Huge Articulation & Travel over nearly Any Surface you care to use it on,
NEW GULL WING DESIGNED FRONT ARMS
The Front Suspension has great travel, with it's 185mm Long Shocks, New Gull Wing designed front arms give you even More ground clearence over the rough stuff, Big Oversized 7075 alloy turnbuckles take care of the steering and the front upper links, because of all this it makes running on the really rough stuff extremely easy.
The Spec level that these trucks comes with is simply MASSIVE meaning you'll be getting an EXTREMELY highly spec’d truck right out of the box, there's none of this, 'selling you NEEDED hop-up's after you've purchased your truck' beacuse it comes with all these parts already installed.
Meaning you actually get the truck you should get when you spend your hard earned money.
The spec goes much further than just the upgraded parts that you can see, also included are Upgraded Internal bits that you can't see, There's 3 FID Alloy diff cases, Front/Center & Rear, the Front & Rear Diffs come with Helical Cut gears on their Crown gear & Pinions, meaning you get a much smoother & stronger gear mesh
INNOVATIVE WHEEL HEX DESIGN
ALL the Dragon's come with the all new innovative wide extended wheel hex design & fittment, these have Solid Billet Alloy wheel hexes, with extended Front & Rear hubs,
They have 5 Bolts that go right through your wheels to hold them in place, which are then sandwiched between 2 solid alloy plates, meaning they are securely held in place, (rather than the more usual single center nut design)
The Dragons wheels themselves are FID's Tomahawks', which are nearly indestructible.
The tyres fitted are FID's new 'off-road' tyres, which during testing, have proven to be great on nearly all surfaces, gravel, grass, muck & dirt, even snow
VERSION 2 IMPROVEMENTS
The New V2 Design Curved Front arms allow for even more ground clearence at the front (Over 10mm Extra), And they are now Even thicker & stronger, Utilizing Thicker King pins & Bolts
The New V2 Caster Blocks are now much Larger, as are the new steering arms which are also using even larger bearings The V2 7075 Alloy Turnbuckles are again Much Thicker, Stronger & also Longer than before.
Soild Billet Alloy Rear Shock Towers are now included.
They come with a Set of Billet Alloy "Splitting" Centre Diff Towers, to make servicing even easier
Also now fitted are a Full set of New Billet Alloy 'Wide' Axle Extenders, making the Dragon even More planted in the corners
V2 BODY DESIGN
The New V2 Body Design is now made using a Much Thicker 2mm Clear lexan, With an Even Greater bodyshell Design, Including a Roof Spoiler, and More Cage coverage,
All Trucks come with Two Full sheets of Livery Stickers for the bodyshell,
Now also Fitted to the Chassis is a Pair of Dirt Guards to protect the inside of the truck and Cage from the egres of Dirt and Muck when your out having fun in the Mud
DUPONT NYLON PARTS
All the plastic parts used on the truck are made using a DuPont Nylon, Which is Much MUCH Stronger than a Regular Plastic, So they'll be able to stand upto much more abuse than the older types of plastics which are often used on 5th Scale models
All in All the Spec on this truck makes for one of the Best out of the box spec'd 5th Scale Rc's on the Market to date,
Everything, And MORE is Included in the Package for you As you'd Expect from a Company like FID
BILLET ALLOY "SPLITTING" CENTRE DIFF TOWERS
Now fitted to All the Dragons are a pair of FID's Billet Alloy "Splittling" Centre Diff Towers,
These make the servicing of the Centre Diff even Easier than before,
SOLID "FOUR LINK" BARS
The Dragons come fitted with a pair of FID's Solid Billet Alloy "Four Link" Bars,
These are now even Thicker and Stronger than previous generations
While also adding to the superb look and overall quality of the trucks
Now comes with the Item's needed to get you straight up and Running,
All you need to do is Install the Included items and off you go!
Or, You can contact us when you purchase your Dragon,
And for a nominal fee of £100, we can build and install the included equipment onto your Dragon for you.
(This service fee is none refundable)
Included in the Build:
Item's Also Included With the Roller:
Battery Tray Dimensions:
Please ensure you check it over when you install your Engine, Radio Gear, Servos, Battery
To check you are Fully happy with it's function on any Adjustable parts & Linkages,
That Everything runs Smoothly and Free and that Everything is Tight & Threadlocked where needed
|Car Type||Desert Truck|