Hitec D845WP D-Series Mega Scale WP Servo

Hitec D845WP D-Series Mega Scale WP Servo

---

Hitec D845WP Waterproof Monster Torque Mega Servo.

 

 

Hitec is proud to introduce our D-Series Dynamo Servos

 

The waterproof, mega scale, IP-67 rated D845WP

All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering.

Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement.

The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators .

Featuring Hitec’s industry standard 15-tooth output spline with 3mm hex screw,

Each D-series servo brings monster performance never known before in the market.

 

 

 

 

Features

• Wide voltage DC 3.5-8.4V operation
• Ideal for airplanes, giant scale car, boat, UAV and robotics
• Programmable high response digital amplifier with MOSFET drive (requires Hitec Servo Saver sold separately, HRCP4427)
• Steel gears with dual ball bearing supported output shaf
• Center case section is a heat sink

 

 

 

 

 

Compatibility

These are a Direct upgrade replacement for KM X2 & Losi 5ive-T Throttle/Brake

They are also a Direct Fitment in the Losi 5ive-B Steering (They Can Be Fitted as a Dual Servo set up in the Losi 5B)

And They're also a Direct Fitment in the Losi 5ive-B Throttle/Brake

They Can Also be installed in the KM X2 & Losi 5ive-T Steering with 3mm spacers (To clear the chassis)

And they Can be installed in the FID Dragon Hammer Steering with 3mm spacers (To clear the chassis)

 

Heavy Duty Spline

15 teeth

 

 

 

Specifications

Speed (4.8V 6.0V 7.4V):	0.26 sec/60° 0.21 sec/60° 0.17 sec/60°
Torque oz./in. (4.8V 6.0V 7.4V):	2453.82oz-in 565.53oz-in 698.19oz-in
Torque kg./cm. (4.8V 6.0V 7.4V):	32.5kg-cm 40.5kg-cm 50kg-cm
Size in Inches:	2.59 x 1.26 x 2.44".
Size in Millimeters:	66 L x 32 W x 62mm H (46mm H under mount)
Weight oz.:	8.0oz.
Weight g.:	227g.

 

 

 

 

 

Includes

• Hitec D845WP Servo with Wire Lead and Connector
• (39.8mm) Round Nylon Horn
• (46mm) Single Arm Nylon Horn
• (55mm) Double Arm Aluminum Horn
• (61mm) 4-Point Nylon Horn
• Four each Grommets, Eyelets and Mounting Screws

 

 

 

Compatible With

• B042-1 - No
• GR048 - Yes
• X51031 - Thottle/Brake Yes - Steering Yes but need 3mm spacer
• FID002 - Yes
• FID035 - Yes but tight so tray would benefit light sanding to accommodate width
• FIDXL018 - No (maybe with force)
• Fast325B - Yes
• FID035D - No (maybe with force)
• LUS041 - Yes

 

 

Fits:

 

 

• King Motor X2
• HPI Baja
• Losi 5ive-T & 5ive-B
• Losi DBXL
• Losi MTXL
• Dragon Hammer
• Maverick Blackout

   

   

  Will Fit KM Baja's if the Larger Servo Bracket is used, part Number's are -

  660341

  95186-s (Rovan Alloy Bracket)

  GR048-S (GTB Alloy Bracket)

Colour: Blue

Position: Front

Compatible with: HPI Baja 5B, KM Buggy, Rovan Buggy, KM Blade, Q-Baja, KM T1000, HPI Baja 5T, HPI Baja 5SC, Losi 5ive-T, TLR 5ive-B,Losi Mini WRC,King Motor X2,30 Degree North Truck,30 Degree North Buggy,FID Dragon Hammer,FID Dragon Hammer V2,MCD RR5,MCD W5,VEKTA.5,VEKTA.5TT,